NSN 5305-01-218-1458
High Torque Screw
Internal drive ribbed.
Manufacturer part number AS292-4-15 for national stock number 5305012181458.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-218-1458.
-
MPN or Model
AS292-4-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.356 inches and 1.376 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.048 inches and 1.079 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.361 inches and 1.381 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-001-3171 MPN GS837CG2Sensitive Switch
- 5975-00-001-7345 MPN GA800GV48Cable Collar
- 1560-00-070-6048 MPN 128CSM11273-5Wing Fitting Assembly
- 1560-00-075-0845 MPN 123BH10031-3Aircraft Access Door
- 1680-00-078-0748 MPN 128AV63005-3Cabin D Electrical Cockpit Panel
- 5930-00-137-8133 MPN GS32A26N3CPush Switch
- 5985-00-144-8165 MPN 123SCAV5068-19Radio Frequency Transmission Line Section
- 1560-00-165-0277 MPN 85006LAileron
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-218-1458 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-4-15 | Avibank Mfg., Inc. |
GB510CG415 | Northrop Grumman Systems Corporation |
GB510CG415 | Sps Technologies, Llc |
GB510CG415 | Sps Technologies, Llc |
GB510CG415 | Hi-shear Corporation |
GB510CG415 | Alcoa Global Fasteners, Inc. |
GB510CG415 | Lisi Aerospace Canada Corp |