NSN 5305-01-218-5408
Panel Screw
Between 2.910 inches and 2.950 inches fastener length, fillister head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number 90131-1 for national stock number 5305012185408.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-218-5408.
-
MPN or Model
90131-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.330 inches and 0.370 inches -
Fastener Length
Between 2.910 inches and 2.950 inches -
Head Style
Fillister -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
First Diameter From Head
Between 0.125 inches and 0.135 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 2.560 inches and 2.600 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-830-2378 MPN 24267Reactor
- 5905-01-337-9939 MPN 80207-1Voltage Sensitive Resistor
- 5935-01-433-7778 MPN J1577-104-34-1Electrical Connector Cover
- 5305-01-086-1721 MPN 82415-2Shoulder Screw
- 4920-00-021-5118 MPN HS9620Interface Device Adapter Assembly
- 5935-00-430-6305 MPN ED746370-15Electrical Receptacle Connector
- 4920-01-041-5805 MPN GS15789-1Aircraft Maintenance Fixture
- 5950-01-055-1265 MPN 705906Reactor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-218-5408 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |
90131-1 | Hamilton Sundstrand Corporation |
90131-1 | United Technologies Corp |