NSN 5305-01-219-2930
Panel Screw
0.880 inches fastener length, knurled no. 2 head style, 0.500 inches head diameter, head height: between 0.230 inches and 0.270 inches .
Manufacturer part number 323391-1 for national stock number 5305012192930.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-219-2930.
-
MPN or Model
323391-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.880 inches -
Head Style
Knurled no. 2 -
Head Diameter
0.500 inches -
Head Height
Between 0.230 inches and 0.270 inches -
Point Length
0.120 inches -
Point Diameter
Between 0.114 inches and 0.130 inches -
First Diameter From Head
0.130 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.500 inches -
Point Style
Cone -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Point Chamfer Angle
60.0 degrees -
Material
Steel comp 303 -
Material Specification
Astm a582 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-280-1712 MPN 5180-5Stud Terminal
- 5940-00-926-9850 MPN 6510-156-14AStud Terminal
- 1560-00-919-0553 MPN 612466-1Aircraft Structural Component Bracket
- 5935-01-216-8816 MPN 514502-4Electrical Plug Connector Body
- 4920-01-604-9679 MPN 2000AS780-1Fireb Cap Set Nrp
- 5935-00-148-8377 MPN 513188-36-10JElectrical Plug Connector
- 5305-00-059-7577 MPN A318467-4Socket Head Cap Screw
- 5305-00-208-1640 MPN A314097-3Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-219-2930 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
323391-1 | Naval Air Warfare Center Aircraft |
6181-SS-1032TYPE3B | New Haven Mfg Corp |