NSN 5305-01-223-2644
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580V4R15D for national stock number 5305012232644.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-223-2644.
-
MPN or Model
NAS1580V4R15D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.425 inches -
Fastener Length
Between 1.326 inches and 1.356 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.185 inches and 1.205 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-057-6009 MPN NAS1196-8Receptacle Dummy Connector
- 5940-00-836-0091 MPN NAS705G3Stud Terminal
- 1560-01-664-5379 MPN NAS516-1PAircraft Structural Component Fitting
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-005-9071 MPN NAS1352-06H12PSocket Head Cap Screw
- 5305-00-104-5080 MPN NAS1352-7LE36PSocket Head Cap Screw
- 5305-00-143-1985 MPN NAS1625-25Machine Screw
- 5305-00-170-2743 MPN NAS1352C04-31Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-223-2644 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4R15D | National Aerospace Standards |