NSN 5305-01-223-3601
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1578A3R34 for national stock number 5305012233601.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-223-3601.
-
MPN or Model
NAS1578A3R34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 2.473 inches and 2.503 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5940-01-454-0311 MPN NAS1063A6-510ALTerminal Board Marker Strip
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-052-5915 MPN MS35198-59Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-223-3601 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A3R34 | National Aerospace Standards |