NSN 5305-01-223-7124
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number 923AS159 PC 28 for national stock number 5305012237124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-223-7124.
-
MPN or Model
923AS159 PC 28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5935-00-233-4666 MPN 247ASC0396-089Electrical Receptacle Connector
- 5935-00-235-5673 MPN 2602243-3Electrical Receptacle Connector
- 4820-00-269-2191 MPN 62A116C27Plug Valve
- 4920-00-536-4743 MPN 247AS10-193-001Reference Voltage Source
- 5950-00-809-9743 MPN 59A19D5Power Transformer
- 5935-01-085-9963 MPN 642AS0655Electrical Plug Connector
- 5935-01-187-5429 MPN 704AS6275-2Electrical Connector Retaining Plate
- 5935-01-187-8012 MPN 247AS-C0672-011Electrical Receptacle Connector Body
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-223-7124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
923AS159 PC 28 | Naval Air Systems Command |
NAS11527E7 | National Aerospace Standards |
NAS1152E7 | National Aerospace Standards |