NSN 5305-01-225-1275
High Torque Screw
Between 1.785 inches and 1.815 inches fastener length, flat countersunk head style, 0.508 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS7204U22 for national stock number 5305012251275.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-225-1275.
-
MPN or Model
NAS7204U22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.785 inches and 1.815 inches -
Head Style
Flat countersunk -
Head Diameter
0.508 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7204 professional/industrial association standard
More from these suppliers
- 5940-01-612-7420 MPN NAS1063B2-5Terminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-057-2601 MPN MS51038-129Setscrew
- 5305-00-119-7687 MPN NAS662C2LER9Socket Head Cap Screw
- 5305-00-145-1009 MPN NAS1100E06-12BMachine Screw
- 5305-00-180-0289 MPN MILS7839Machine Screw
- 5305-00-206-1082 MPN NAS517-5-8Machine Screw
- 5305-00-225-7775 MPN MS16996-25Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-225-1275 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7204U22 | National Aerospace Standards |