NSN 5305-01-225-2611
High Torque Screw
Between 2.638 inches and 2.668 inches fastener length, flat countersunk head style, 0.506 inches head diameter, grip diameter: between 2.2485 inches and 2.2495 inches .
Manufacturer part number NAS1580A4R36 for national stock number 5305012252611.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-225-2611.
-
MPN or Model
NAS1580A4R36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.332 inches and 0.403 inches -
Fastener Length
Between 2.638 inches and 2.668 inches -
Head Style
Flat countersunk -
Head Diameter
0.506 inches -
Grip Diameter
Between 2.2485 inches and 2.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-156-7196 MPN NASM77072Lug Terminal
- 5305-00-005-0656 MPN NAS1152V4Close Tolerance Screw
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
- 5305-00-043-0417 MPN NAS1124-1HClose Tolerance Screw
- 5305-00-052-6876 MPN MS24627-52Tapping Screw
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-068-5401 MPN MS16996-1Socket Head Cap Screw
- 5305-00-082-4729 MPN MS21125-0310Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-225-2611 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4R36 | National Aerospace Standards |
NAS1580A4R36T | National Aerospace Standards |