NSN 5305-01-226-1950
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-2407 for national stock number 5305012261950.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-226-1950.
-
MPN or Model
LD111-0044-2407
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.382 inches and 0.412 inches -
Fastener Length
Between 0.820 inches and 0.850 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-116-9174 MPN ST3M733-3L7Close Tolerance Screw
- 5305-01-454-0948 MPN LD111-0046-2411Machine Screw
- 5305-01-511-6974 MPN 3M1170D3-14AClose Tolerance Screw
- 5306-00-263-8734 MPN GB511B4D14Shear Bolt
- 5306-00-728-1324 MPN 3M33-6-6Shear Bolt
- 5306-01-043-7711 MPN VAL22034-4G15Shear Bolt
- 5306-01-060-7240 MPN C4356N4D1050Shoulder Bolt
- 5306-01-135-3514 MPN VCG0002-5-12Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-226-1950 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2407 | Boeing Company, The |
LD111-0044-2407 | Valley-todeco, Inc. |
LD111-0044-2407 | Sps Technologies, Llc |
LD111-0044-2407 | Sps Technologies, Llc |
LD111-0044-2407 | Sonic Industries Inc. |
LD111-0044-2407 | Sps Technologies, Llc |
LD111-0044-2407 | Hi-shear Corporation |
LD111-0044-2407 | Sps Technologies, Llc |
Stock Check
- NE: 369
- NS: 172