NSN 5305-01-227-4607
High Torque Screw
0.448 inches fastener length, pan no. 2 head style, between 0.308 inches and 0.322 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS5002-2 for national stock number 5305012274607.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-227-4607.
-
MPN or Model
NAS5002-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.448 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.308 inches and 0.322 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1325 inches and 0.1335 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas5002 professional/industrial association standard
More from these suppliers
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-052-9802 MPN MS24694C50Machine Screw
- 5305-00-053-1114 MPN MS51861-15Tapping Screw
- 5305-00-054-6869 MPN MS51031-48Setscrew
- 5305-00-082-0580 MPN NAS1634-27Machine Screw
- 5305-00-143-3445 MPN NAS1505-16Close Tolerance Screw
- 5305-00-150-9596 MPN MILS7839Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-227-4607 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5002-2 | National Aerospace Standards |
NAS5002-2 | National Aerospace Standards |