NSN 5305-01-227-4608
High Torque Screw
Between 0.433 inches and 0.463 inches fastener length, pan no. 2 head style, between 0.367 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.108 inches .
Manufacturer part number NAS5003-2 for national stock number 5305012274608.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-227-4608.
-
MPN or Model
NAS5003-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.433 inches and 0.463 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.367 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.108 inches -
Grip Diameter
Between 0.1081 inches and 0.1087 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas5003 professional/industrial association standard
More from these suppliers
- 5945-01-582-1894 MPN 200945001-10Solid State Relay
- 5305-00-007-9880 MPN NAS1100C04-5PMachine Screw
- 5305-00-031-2387 MPN NAS1184-10Close Tolerance Screw
- 5305-00-043-0613 MPN NAS1189-3T7Socket Head Cap Screw
- 5305-00-052-8884 MPN MS24630-20Tapping Screw
- 5305-00-071-1766 MPN MS90725-108Hexagon Head Cap Screw
- 5305-00-097-8959 MPN NAS1190-06PP7KSocket Head Cap Screw
- 5305-00-161-1603 MPN NAS1173-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-227-4608 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5003-2 | National Aerospace Standards |
NAS5003-2 | National Aerospace Standards |