NSN 5305-01-227-4614
High Torque Screw
Between 0.620 inches and 0.650 inches fastener length, pan no. 2 head style, between 0.367 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.108 inches .
Manufacturer part number NAS5003-5 for national stock number 5305012274614.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-227-4614.
-
MPN or Model
NAS5003-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.620 inches and 0.650 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.367 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.108 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas5003 professional/industrial association standard
More from these suppliers
- 5940-01-443-8870 MPN NAS1063A4-138ADTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-050-6824 MPN MS24677-76Socket Head Cap Screw
- 5305-00-058-2599 MPN NAS1620-3Machine Screw
- 5305-00-145-1032 MPN NAS1152-13Close Tolerance Screw
- 5305-00-159-5556 MPN NAS1102E03-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-227-4614 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5003-5 | National Aerospace Standards |
NAS5003-5 | National Aerospace Standards |
Stock Check
- NE: 2337
- NS: 720
- SV: 9