NSN 5305-01-228-3277
Panel Screw
Between 2.156 inches and 2.250 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number 13082133 for national stock number 5305012283277.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-228-3277.
-
MPN or Model
13082133
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.810 inches -
Fastener Length
Between 2.156 inches and 2.250 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Point Length
0.190 inches -
First Diameter From Head
0.140 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.250 inches -
Point Style
Cup -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-132-2645 MPN 11041014-1Plug-in Electronic Components Socket
- 5905-01-265-5539 MPN P55182-009-08Film Fixed Resistor
- 5935-01-289-4185 MPN 717801186-001Electrical Receptacle Connector
- 5950-01-463-1789 MPN 13077732Electrical Coil
- 4920-01-559-3031 MPN 77441000-039Interface Device Adapter Assembly
- 5905-00-456-0662 MPN 10630208-105Composition Fixed Resistor
- 5940-00-269-6411 MPN 53-33-6A14Terminal Board
- 5935-00-184-5981 MPN P24308-006-01Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-228-3277 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
13082133 | Lockheed Martin Corporation |
13082133 | Program Manager Advanced Attack |