NSN 5305-01-229-8019
High Torque Screw
Retaining element on shank.
Manufacturer part number MS27577-6-19 for national stock number 5305012298019.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-229-8019.
-
MPN or Model
MS27577-6-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.522 inches and 0.558 inches -
Fastener Length
Between 1.726 inches and 1.746 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.188 inches and 1.204 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.528 inches first hole and 1.548 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-5738 MPN MS17344R18C1PYElectrical Plug Connector
- 5935-00-102-7999 MPN M39024/10-10Tip Jack
- 5935-00-149-3129 MPN MS3108B18-13SElectrical Plug Connector
- 5935-00-173-9804 MPN MS3108B24-1PElectrical Plug Connector
- 5935-00-189-1069 MPN MS3106F24-6SElectrical Plug Connector
- 5935-00-201-7512 MPN MS3102E22-14PYElectrical Receptacle Connector
- 5940-00-204-8966 MPN MS250036-102Lug Terminal
- 5935-00-280-2056 MPN MS3102C16-13PElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-229-8019 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-6-19 | Military Standards |