NSN 5305-01-229-8020
High Torque Screw
Retaining element on shank.
Manufacturer part number MS27577-8-22 for national stock number 5305012298020.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-229-8020.
-
MPN or Model
MS27577-8-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.666 inches -
Fastener Length
Between 2.021 inches and 2.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.959 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.375 inches and 1.391 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.765 inches first hole and 1.785 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-001-1948 MPN MS51850-24Tapping Screw
- 5305-00-051-4485 MPN MS51973-10Setscrew
- 5305-00-052-5927 MPN MS35198-76Machine Screw
- 5305-00-052-5950 MPN MS35198-9Machine Screw
- 5305-00-052-7442 MPN MS24627-3Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-229-8020 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-8-22 | National Aerospace Standards |
MS27577-8-22 | Military Standards |