NSN 5305-01-229-9968
High Torque Screw
Between 1.422 inches and 1.469 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3112 inches and 0.3117 inches .
Manufacturer part number S2329075-14A for national stock number 5305012299968.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-229-9968.
-
MPN or Model
S2329075-14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.417 inches -
Fastener Length
Between 1.422 inches and 1.469 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Width Across Flats
Between 0.1885 inches and 0.1905 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type 1 class 3 federal specification single treatment response head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-046-1858 MPN 2344584Aircraft Fairing
- 1560-00-046-2669 MPN 2445506Handle Assembly
- 5975-00-122-3228 MPN 5114173-9Flexible Metal Conduit Assembly
- 1560-00-124-1957 MPN 5173069Cowling
- 1560-00-124-6331 MPN 2141757Cent Elbow Assembly
- 1560-00-125-3964 MPN 5140039-62Strip
- 1560-00-125-6103 MPN 2117066Aircraft Structural Component Bracket
- 1560-00-199-9745 MPN 2117924-1Auxiliary Door Latch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-229-9968 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S2329075-14A | Boeing Company, The |
S2329075-14A | Boeing Company, The |