NSN 5305-01-231-2206
High Torque Screw
Between 0.6425 inches and 0.6725 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number BACB30LK2-5 for national stock number 5305012312206.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-231-2206.
-
MPN or Model
BACB30LK2-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.6425 inches and 0.6725 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.3025 inches and 0.3225 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-073-1120 MPN 107S8425-31Link Assembly
- 1560-00-073-2458 MPN 107S8326-299Housing
- 1560-00-084-2124 MPN 35-19766-503Aircraft Structural Component Support
- 5935-00-128-2944 MPN 29-37777-6Plug Dummy Connector
- 5935-00-130-0495 MPN 26-14687-1Plug Dummy Connector
- 1560-00-231-9229 MPN 5-89825-4Aircraft Structural Panel
- 1560-00-233-1101 MPN 50-6237-3033Elevator Balance Weight
- 5950-00-474-4907 MPN 10-30258Power Transformer
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-231-2206 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LK2-5 | The Boeing Company |
Stock Check
- NS: 2326
- NE: 3660