NSN 5305-01-231-2210
High Torque Screw
Identify w/green dye or paint on thread end.
Manufacturer part number BACB30LH4-20 for national stock number 5305012312210.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-231-2210.
-
MPN or Model
BACB30LH4-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
Between 1.624 inches and 1.654 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2485 inches and 0.2495 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjs -
Specification Data
81205-bacb30lh manufacturers standard
More from these suppliers
- 5935-00-008-6510 MPN 25-75241-3Plug Dummy Connector
- 1560-00-035-1235 MPN 6-52407-2Pilots Window Shaft Assembly
- 5935-00-169-2034 MPN 25-66556-1Electrical Plug Connector
- 1560-00-304-5569 MPN 9-60309-1Aircraft Structural Component Support
- 1680-00-340-9352 MPN 5-97039-1Aircraft Gearbox Assembly
- 5905-00-494-8901 MPN BACRH14W51000FGFilm Fixed Resistor
- 1560-00-571-8722 MPN 66-1425Control Tab Hinge Support
- 1560-00-606-5721 MPN 90-1417-10Aircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-231-2210 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4-20 | The Boeing Company |