NSN 5305-01-231-7414
High Torque Screw
Cetyl alcohol lubrication.
Manufacturer part number HT4020-4-12 for national stock number 5305012317414.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-231-7414.
-
MPN or Model
HT4020-4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.502 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-3365 MPN HT8138-3-3Close Tolerance Screw
- 5305-00-356-1620 MPN LS15266V3-6Close Tolerance Screw
- 5305-00-505-2935 MPN LS15264V3-5Machine Screw
- 5305-01-046-3343 MPN HT4010-5-8Shoulder Screw
- 5305-01-104-1068 MPN HT4068-4-7AClose Tolerance Screw
- 5305-01-132-0518 MPN HT4049-5-12Close Tolerance Screw
- 5305-01-132-8502 MPN SC2219-306Machine Screw
- 5305-01-142-8397 MPN HT4049-6D48XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-231-7414 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-4-12 | Huck International, Inc. |
HT4020-4-12 | Arconic Global Fasteners & Rings, |
HT4020-4-12 | Sps Technologies, Llc |
HT4020-4-12 | Hi-shear Corporation |
ST3M652C4-12D | Boeing Company, The |
ST3M652C4-12D | Alcoa Global Fasteners, Inc. |
HT4020-4-12 | Lisi Aerospace Canada Corp |
HT4020-4-12 | Huck Intl Inc |
HT4020-4-12 | Alcoa Global Fasteners, Inc. |