NSN 5305-01-231-9340
High Torque Screw
Between 0.749 inches and 0.779 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number BACB30LH4U6 for national stock number 5305012319340.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-231-9340.
-
MPN or Model
BACB30LH4U6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
Between 0.749 inches and 0.779 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjs
More from these suppliers
- 5935-00-008-0247 MPN 25-75242-1Plug Dummy Connector
- 1560-00-015-2105 MPN 65-37350-3Aircraft Structural Plate
- 1560-00-073-1099 MPN 107S8488-3Hinge Fitting
- 1560-00-216-1241 MPN 9-24458-1Bomb Door Actuating Rod Assembly
- 1560-00-217-5039 MPN 5-36389-3Bracket Assembly
- 1560-00-309-6680 MPN 25-5703-1Panel Structure Cover
- 5935-00-433-5443 MPN 25-61069-1Electrical Connector Retainer
- 1560-00-575-6302 MPN 5-89356-1Aircraft Windshield Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-231-9340 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4U6 | The Boeing Company |
BACB30LH4U6 | The Boeing Company |
BACB30LH4U6 | The Boeing Company |
BACB30LH4U6 | The Boeing Company |
BACB30LH4U6 | The Boeing Company |
BACB30LH4U6 | The Boeing Company |