NSN 5305-01-232-0430
High Torque Screw
Between 1.280 inches and 1.300 inches fastener length, flat countersunk head style, 0.888 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number GB510-CE7-10D for national stock number 5305012320430.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-232-0430.
-
MPN or Model
GB510-CE7-10D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.665 inches -
Fastener Length
Between 1.280 inches and 1.300 inches -
Head Style
Flat countersunk -
Head Diameter
0.888 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.950 inches and 0.982 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-3131 MPN GA800PC24-8DElectrical Connector Backshell
- 1560-00-012-6044 MPN 128CSM10964-3Rib Fitting
- 1560-00-075-0931 MPN 128WM10443-2Beam Assembly
- 1560-00-152-0954 MPN 87095-11LAircraft Door
- 1560-00-153-1108 MPN A51B54006-2Aircraft Access Door
- 1560-00-172-2339 MPN 123CS50140-4Stabiliz Cover Assy
- 5985-00-172-2380 MPN 123SCAV5698-1Waveguide Assembly
- 5985-00-172-6269 MPN 123SCAV5662-3Waveguide Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-232-0430 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510-CE7-10D | Northrop Grumman Systems Corporation |
PBF1202-7-10D | Sps Technologies, Llc |
HR204-7-10D | Hi-shear Corporation |
GB510-CE7-10D | Northrop Grumman Systems Corporation |
PBF1202-7-10D | Sps Technologies, Llc |
HR204-7-10D | Hi-shear Corporation |
GB510-CE7-10D | Northrop Grumman Systems Corporation |
PBF1202-7-10D | Sps Technologies, Llc |
HR204-7-10D | Hi-shear Corporation |
GB510-CE7-10D | Northrop Grumman Systems Corporation |
HR204-7-10D | Hi-shear Corporation |
PBF1202-7-10D | Sps Technologies, Llc |
GB510-CE7-10D | Northrop Grumman Systems Corporation |
PBF1202-7-10D | Sps Technologies, Llc |
HR204-7-10D | Hi-shear Corporation |