NSN 5305-01-232-6040
High Torque Screw
Between 1.470 inches and 1.620 inches fastener length, flat countersunk head style, between 0.5149 inches and 0.5662 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1581A6T5 for national stock number 5305012326040.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-232-6040.
-
MPN or Model
NAS1581A6T5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.470 inches and 1.620 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5149 inches and 0.5662 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response and mil-s-5000 military specification 2nd material response and mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5305-00-005-0629 MPN NAS1190E04P6NSocket Head Cap Screw
- 5305-00-027-5752 MPN MS21262-28Socket Head Cap Screw
- 5305-00-119-7635 MPN NAS1741C02R3USocket Head Cap Screw
- 5305-00-151-2723 MPN MILS7839Machine Screw
- 5305-00-196-4336 MPN NAS1100E04-5Machine Screw
- 5305-00-227-0989 MPN NAS608C6-32Socket Head Cap Screw
- 5305-00-338-2047 MPN NAS1100E4-12Machine Screw
- 5305-00-369-1430 MPN NAS1190E04P5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-232-6040 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581A6T5 | National Aerospace Standards |