NSN 5305-01-236-6191
High Torque Screw
Top of head is flat.
Manufacturer part number 121754-6-26 for national stock number 5305012366191.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-236-6191.
-
MPN or Model
121754-6-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.545 inches and 0.595 inches -
Fastener Length
Between 2.180 inches and 2.210 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.515 inches and 0.535 inches -
Head Height
Between 0.096 inches and 0.109 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-031-1136 MPN 51B581-3-7Close Tolerance Screw
- 5305-01-054-6235 MPN C9535-6-17Close Tolerance Screw
- 5305-01-054-6273 MPN C7985-5-15Close Tolerance Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-449-3797 MPN C9535-6-9Close Tolerance Screw
- 5305-01-477-5741 MPN TX1026D6-13AClose Tolerance Screw
- 5305-01-513-8723 MPN TX1026C4-10AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-236-6191 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-6-26 | Sps Technologies, Llc |
AIC9535-6-26 | Sps Technologies, Llc |
VT1696-6-26 | Arconic Global Fasteners & Rings, |
PBF1198-6-26 | Sps Technologies, Llc |
121754-6-26 | Sps Technologies, Llc |
VT1696-6-26 | Alcoa Global Fasteners, Inc. |
C9535-6-26 | Lockheed Martin Corporation |