NSN 5305-01-236-6192
High Torque Screw
Top of head is flat.
Manufacturer part number 121754-7-19 for national stock number 5305012366192.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-236-6192.
-
MPN or Model
121754-7-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.658 inches and 0.708 inches -
Fastener Length
Between 1.856 inches and 1.886 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.605 inches and 0.625 inches -
Head Height
Between 0.112 inches and 0.125 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-262-3240 MPN AIC813-06R7Machine Screw
- 5305-00-450-7446 MPN AIC79-5-15Close Tolerance Screw
- 5305-01-047-8822 MPN 53B336-6Close Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-169-0014 MPN LD111-0047-2306Close Tolerance Screw
- 5305-01-350-2246 MPN AIC1658-4A11Close Tolerance Screw
- 5305-01-439-5688 MPN TX1026V3-16AClose Tolerance Screw
- 5305-01-455-1616 MPN A1C4463-3-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-236-6192 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-19 | Sps Technologies, Llc |
AIC9535-7-19 | Sps Technologies, Llc |
VT1696-7-19 | Arconic Global Fasteners & Rings, |
PBF1198-7-19 | Sps Technologies, Llc |
121754-7-19 | Sps Technologies, Llc |
VT1696-7-19 | Alcoa Global Fasteners, Inc. |
C9535-7-19 | Lockheed Martin Corporation |