NSN 5305-01-237-6771
High Torque Screw
Furnished with o-ring.
Manufacturer part number 54266-3-1 for national stock number 5305012376771.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-237-6771.
-
MPN or Model
54266-3-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 1.515 inches and 1.562 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
3-48 cage 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
3-48 cage 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-170-2952 MPN HT8138-3-3TClose Tolerance Screw
- 5305-00-345-1582 MPN LS15265V4-20Close Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-01-054-6241 MPN 09535-5-28Close Tolerance Screw
- 5305-01-059-7477 MPN BACB30LK3-2Close Tolerance Screw
- 5305-01-076-4942 MPN HT4016-4-9Close Tolerance Screw
- 5305-01-185-2215 MPN HT4069-3-2Close Tolerance Screw
- 5305-01-200-9877 MPN 3M1034C5-8-27Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-237-6771 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
54266-3-1 | Sps Technologies, Llc |
HT4UA-CA-3-18 | Hi-shear Corporation |
3M46-3-18 | Boeing Company, The |
HT408A-3-18 | Arconic Global Fasteners & Rings, |
HTS467-3-18 | Huck International, Inc. |
3M46-3-18 | Alcoa Global Fasteners, Inc. |
HT4UA-CA-3-18 | Lisi Aerospace Canada Corp |
HTS467-3-18 | Huck Intl Inc |
HT408A-3-18 | Alcoa Global Fasteners, Inc. |