NSN 5305-01-240-5173
Bolt Stove
0.438 inches fastener length, flat countersunk head style, between 0.285 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 109430-3049 for national stock number 5305012405173.
Datasheet
-
Product description
Machine Screw NSN 5305-01-240-5173.
-
MPN or Model
109430-3049
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.376 inches and 0.438 inches -
Fastener Length
0.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.285 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Screw Material
Steel comp 302 and steel comp 303 and steel comp 304 -
Screw Material Specification
66 federal standard single material response -
Screw Surface Treatment
Primer and enamel lusterless -
Screw Surface Treatment Specification
Mil-p-15328 military specification 1st treatment response and 595, 36231 federal standard 2nd treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-570-6119 MPN 136245-1Electrical Connector Retainer
- 5985-00-811-0366 MPN 237971-805Fixed Attenuator
- 5930-00-829-3214 MPN 168665-1Rotary Switch
- 5935-01-104-5702 MPN 186082-1Plug-in Electronic Components Socket
- 5950-01-182-3361 MPN 365175-803Radio Frequency Coil
- 5935-01-431-7026 MPN 170151-1Electrical Connector Backshell
- 5905-01-453-4460 MPN 238335-67Film Fixed Resistor
- 5950-01-467-6309 MPN 36182-11Radio Frequency Coil
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-240-5173 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
109430-3049 | Raytheon Company |
109430-3049 | Raytheon Company |