NSN 5305-01-240-7395
High Torque Screw
Furnished with rubber o-ring.
Manufacturer part number HT4067-4-16A for national stock number 5305012407395.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-240-7395.
-
MPN or Model
HT4067-4-16A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.454 inches and 1.484 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.501 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-079-1373 MPN HT4041-3-8-5Close Tolerance Screw
- 5305-01-142-8403 MPN HT4020-6-12AYShoulder Screw
- 5305-01-194-0643 MPN GB510CH08C5Close Tolerance Screw
- 5305-01-199-7852 MPN HT4075V5-9-37Close Tolerance Screw
- 5305-01-431-9980 MPN SC2174V3-10HClose Tolerance Screw
- 5305-01-564-5716 MPN BACS12CK08D7Machine Screw
- 5306-00-324-7716 MPN VS3060-12-82Close Tolerance Bolt
- 5306-00-958-5420 MPN MS21250-09024Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-240-7395 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4067-4-16A | Arconic Global Fasteners & Rings, |
642AS1631-4 | Naval Air Systems Command |
HT4067-4-16A | Alcoa Global Fasteners, Inc. |