NSN 5305-01-240-7396
High Torque Screw
Furnished with rubber o-ring.
Manufacturer part number 3M925C4-19A for national stock number 5305012407396.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-240-7396.
-
MPN or Model
3M925C4-19A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.493 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.501 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-233-5061 MPN 247ASC1667-001Power Transformer
- 5930-00-234-4132 MPN 65A81C43Solid State Switch
- 4920-00-408-2982 MPN 67A42D119Accelerometer Adapter
- 5950-01-012-9060 MPN 247AS-C1210-001Radio Frequency Coil
- 5985-01-014-0360 MPN DMN-27-1(A)Antenna
- 5950-01-068-5859 MPN 1142AS335Reactor
- 5935-01-089-2589 MPN 810AS497-2Electrical Plug Connector
- 4920-01-126-1876 MPN 410AS500Data Link Test Set
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-240-7396 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M925C4-19A | Boeing Company, The |
HT4067-4-19A | Sps Technologies, Llc |
642AS1631-7 | Naval Air Systems Command |
11881C4-19A | Reid Products Inc. |
HT4067-4-19A | Sps Technologies, Llc |
642AS1631-7 | Naval Air Systems Command |