NSN 5305-01-241-0757
High Torque Screw
Furnished with one o-ring; cetyl alcohol lubricant.
Manufacturer part number HT4020-6-19A for national stock number 5305012410757.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-241-0757.
-
MPN or Model
HT4020-6-19A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.614 inches and 0.681 inches -
Fastener Length
Between 1.812 inches and 1.859 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.756 inches and 0.760 inches -
Head Height
Between 0.115 inches and 0.116 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-6465 MPN GB511DU3-3Machine Screw
- 5305-00-764-3035 MPN HT403A6-12Machine Screw
- 5305-00-902-6577 MPN 51B221-50HMachine Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-044-2247 MPN HT4020-5-9Close Tolerance Screw
- 5305-01-144-2213 MPN HT4041-3-7-5YShoulder Screw
- 5305-01-158-5373 MPN SC2163-5-6Machine Screw
- 5305-01-164-5543 MPN HT4054-4D23AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-241-0757 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-6-19A | Huck International, Inc. |
HT4020-6-19A | Arconic Global Fasteners & Rings, |
HT4020-6-19A | Hi-shear Corporation |
HT4020-6-19A | Sps Technologies, Llc |
HT4020-6-19A | Lisi Aerospace Canada Corp |
ST3M652C6-19A | Boeing Company, The |
ST3M652C6-19A | Alcoa Global Fasteners, Inc. |
ST3M652C6-19A | Sps Technologies Ltd Tj Brooks |
HT4020-6-19A | Huck Intl Inc |
10113572 | Nimikkeistokeskus Ncb Finland |
HT4020-6-19A | Alcoa Global Fasteners, Inc. |