NSN 5305-01-241-2622
Panel Screw
Supply with lock washer,flat washer and spring.
Manufacturer part number FT1068-T-5 for national stock number 5305012412622.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-241-2622.
-
MPN or Model
FT1068-T-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.281 inches -
Fastener Length
1.081 inches -
Head Style
Hexagon -
Head Height
0.245 inches -
Width Between Flats
Between 0.367 inches and 0.375 inches -
First Diameter From Head
Between 0.208 inches and 0.211 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.800 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Width Across Flats
Between 0.140 inches and 0.142 inches -
Thready Qty Per Inch (tpi)
28 -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-008-0045 MPN 999D886G01Aircraft Components Test Set Subassembly
- 5935-00-803-1445 MPN 990C771H02Tip Jack
- 5905-01-017-8094 MPN 990C050H01-1432Inductive Wire Wound Fixed Resistor
- 4920-01-061-3886 MPN 975B568G04Test Set
- 5985-01-310-7366 MPN 768R214G01Antenna
- 4920-01-200-7232 MPN 2D10172G01Test Adapter
- 5305-01-555-9343 MPN FT1182HS-121-28AMachine Screw
- 5306-01-632-0148 MPN JSFB10-7-22Internal Wrenching Bolt
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-241-2622 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FT1068-T-5 | Fastener Technology Corp. |
989C195H04 | Northrop Grumman Systems Corporation |
989C95H04 | Northrop Grumman Systems Corporation |