NSN 5305-01-243-0757
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580C4R56 for national stock number 5305012430757.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-243-0757.
-
MPN or Model
NAS1580C4R56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 3.888 inches and 3.918 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-341-7798 MPN NAS1063A20-4SCTerminal Board Marker Strip
- 5940-01-413-3019 MPN NAS1063B75-91Terminal Board Marker Strip
- 5940-01-425-6042 MPN NAS1063A5-437Terminal Board Marker Strip
- 5305-00-008-5884 MPN NAS1101E08-9Machine Screw
- 5305-00-067-9912 MPN MS24667-17Socket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-167-3631 MPN NASM7839Machine Screw
- 5305-00-174-8696 MPN NAS1219C3-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-243-0757 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C4R56 | National Aerospace Standards |
NAS1580C4R56 | National Aerospace Standards |
NAS1580C4R56 | National Aerospace Standards |