NSN 5305-01-244-8894
High Torque Screw
Retaining element in shank.
Manufacturer part number MS21130B3-16 for national stock number 5305012448894.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-244-8894.
-
MPN or Model
MS21130B3-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.356 inches and 0.392 inches -
Fastener Length
Between 1.372 inches and 1.392 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches second hole and 0.070 inches second hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.000 inches and 1.016 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-725-9498 MPN NAS707C2Stud Terminal
- 5940-00-836-0091 MPN NAS705G3Stud Terminal
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-425-6036 MPN NAS1063A5-431Terminal Board Marker Strip
- 5975-01-568-9142 MPN NAS1715C11NHStrain Electrical Conductor Clamp
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-244-8894 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21130B3-16 | National Aerospace Standards |
MS21130B3-16 | Military Standards |