NSN 5305-01-244-8895
High Torque Screw
0.800 inches fastener length, flat chamfer head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number AIC1181C306 for national stock number 5305012448895.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-244-8895.
-
MPN or Model
AIC1181C306
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.435 inches -
Fastener Length
0.800 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.365 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-073-1950 MPN AIC811-4-6Socket Head Cap Screw
- 5305-00-144-0545 MPN NAS1101C3H16Machine Screw
- 5305-00-146-7176 MPN AIC1023V6-17Close Tolerance Screw
- 5305-00-308-1675 MPN AIC813-06R17Machine Screw
- 5305-01-070-6441 MPN A1C812-3-10Machine Screw
- 5305-01-158-5370 MPN AI940-3-6Machine Screw
- 5305-01-417-2493 MPN TX1026V4-18AClose Tolerance Screw
- 5305-01-462-1650 MPN AIC9535-7-40Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-244-8895 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1181C306 | Sps Technologies, Llc |
SC2219C4-306 | Arconic Global Fasteners & Rings, |
106428-306 | Sps Technologies, Llc |
CA1184C306 | Textron Fastening Systems |
903206-306 | Raytheon Company |
AIC1181C306 | Sps Technologies, Llc |
903206-306 | Raytheon Company |
SC2219C4-306 | Arconic Global Fasteners & Rings, |
106428-306 | Sps Technologies, Llc |
CA1184C306 | Textron Fastening Systems |