NSN 5305-01-247-6837
High Torque Screw
Internal drive ribbed.
Manufacturer part number HR203-5-16 for national stock number 5305012476837.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-247-6837.
-
MPN or Model
HR203-5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.422 inches and 0.489 inches -
Fastener Length
Between 1.432 inches and 1.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Screw, close tolerance -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-0183 MPN 3MA334CFA7Machine Screw
- 5305-00-364-7307 MPN LS15276V3-16Machine Screw
- 5305-00-548-5077 MPN 51B581-4-9HClose Tolerance Screw
- 5305-01-028-0186 MPN HT1029A-5-10Close Tolerance Screw
- 5305-01-158-6762 MPN SC2163-3-8Machine Screw
- 5305-01-179-0907 MPN HS4727-3-2Machine Screw
- 5305-01-417-2497 MPN TX1027D4-16AClose Tolerance Screw
- 5305-01-462-2836 MPN TX1026V4-7AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-247-6837 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR203-5-16 | Hi-shear Corporation |
HR203-5-16 | Lisi Aerospace Canada Corp |
GB510DE5-16 | Arconic Global Fasteners & Rings, |
SCD1780-5-16 | Arconic Global Fasteners & Rings, |
GB510DE5-16 | Sps Technologies, Llc |
GB510DE5-16 | Hi-shear Corporation |
GB510DE5-16 | Sps Technologies, Llc |
12995D-5-16 | Sps Technologies, Llc |
GB510DE5-16 | Lisi Aerospace Canada Corp |
PBF1360-5-16 | Sps Technologies, Llc |
GB510DE5-16 | Northrop Grumman Systems Corporation |
HR203-5-16 | Hi-shear Corporation |
PBF1360-5-16 | Sps Technologies, Llc |
GB510DE5-16 | Northrop Grumman Systems Corporation |