NSN 5305-01-248-9795
High Torque Screw
Between 0.823 inches and 0.853 inches fastener length, flat countersunk head style, between 0.1885 inches and 0.1895 inches grip diameter, internal drive style: offset cruciform (torque set).
Manufacturer part number NAS1993-8T for national stock number 5305012489795.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-248-9795.
-
MPN or Model
NAS1993-8T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.823 inches and 0.853 inches -
Head Style
Flat countersunk -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
108000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1993 professional/industrial association standard
More from these suppliers
- 5940-01-382-2946 MPN NAS1063A16-3Terminal Board Marker Strip
- 5975-01-487-0387 MPN MS3533P-136Electrical Components Tiedown Strap
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-078-0187 MPN NAS623-2-17Machine Screw
- 5305-00-142-5051 MPN MS24625-60Tapping Screw
- 5305-00-202-1952 MPN NAS81081-08D6Setscrew
- 5305-00-239-7756 MPN NAS1635-06LL3Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-248-9795 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1993-8T | National Aerospace Standards |
NAS1993-8 | National Aerospace Standards |