NSN 5305-01-249-8617
Panel Screw
0.335 inches fastener length, between 6.528 inches and 7.087 inches head diameter, between 0.095 inches and 0.105 inches first diameter from head, distance from largest bearing surface of head to end of first diameter: 0.395 inches .
Manufacturer part number 238446-011 for national stock number 5305012498617.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-249-8617.
-
MPN or Model
238446-011
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.155 inches and 0.170 inches -
Fastener Length
0.335 inches -
Head Diameter
Between 6.528 inches and 7.087 inches -
First Diameter From Head
Between 0.095 inches and 0.105 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.395 inches -
End Application
An/alr-56c -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
725 pounds per square inch -
Countersink Angle
100.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Material Specification
Ms24693-c27 military standard single material response -
Surface Treatment
Passivate
More from these suppliers
- 5905-00-141-1130 MPN 224681-897Composition Fixed Resistor
- 5950-00-456-3463 MPN 196193-000Power Inductor
- 5935-00-478-7293 MPN 134198-001Electrical Receptacle Connector
- 5985-01-160-8223 MPN 202717-001Radio Frequency Transmission Line Switch
- 5985-00-222-6420 MPN 68-89Antenna
- 6110-01-242-9765 MPN 230625-902Voltage Regulator Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-249-8617 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
238446-011 | Bae Systems Information And |