NSN 5305-01-250-0641
High Torque Screw
Internal drive ribbed.
Manufacturer part number C7985-4-10 for national stock number 5305012500641.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-250-0641.
-
MPN or Model
C7985-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.368 inches and 0.438 inches -
Fastener Length
Between 1.003 inches and 1.053 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-547-3451 MPN AIC792-5-15Close Tolerance Screw
- 5305-01-337-7455 MPN BACS12GU3R12Machine Screw
- 5305-01-352-2078 MPN AIC4410-8-21Close Tolerance Screw
- 5305-01-357-5869 MPN AIC4463-3-37Machine Screw
- 5305-01-435-3875 MPN BACB30LU7-37Close Tolerance Screw
- 5305-01-444-2398 MPN HT4020-4-9AClose Tolerance Screw
- 5305-01-468-9141 MPN TX1024D5D16-5AClose Tolerance Screw
- 5305-01-526-3985 MPN 120-271V3A4Aircraf Screw Shear
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-250-0641 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-4-10 | Arconic Global Fasteners & Rings, |
C7985-4-10 | Sps Technologies, Llc |
C7985-4-10 | Sps Technologies, Llc |
C7985-4-10 | Alcoa Global Fasteners, Inc. |
C7985-4-10 | Lockheed Martin Corporation |
AIC985-4-10P | Sps Technologies, Llc |
VT1694F4-10 | Arconic Global Fasteners & Rings, |
H185-4-10 | Huck International, Inc. |
121558-4-A10P | Sps Technologies, Llc |
121558-4-A10P | Sps Technologies, Llc |
VT1694F4-10 | Alcoa Global Fasteners, Inc. |
H185-4-10 | Huck Intl Inc |
C7985-4-10 | Sps Technologies, Llc |
AIC985-4-10 | Sps Technologies, Llc |
SF117-4-10 | Saturn Fasteners Inc |