NSN 5305-01-250-6716
High Torque Screw
Supply with o ring,coat non bearing surface of head white.
Manufacturer part number HT4020-6-12A for national stock number 5305012506716.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-250-6716.
-
MPN or Model
HT4020-6-12A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.375 inches and 1.422 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.7556 inches and 0.7604 inches -
Head Height
Between 0.1147 inches and 0.1167 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-538-7413 MPN BACB30LU6-21Close Tolerance Screw
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-279-1254 MPN BACB30NN3K2Close Tolerance Screw
- 5305-01-477-5960 MPN 3M1170V4-7AClose Tolerance Screw
- 5306-00-003-9388 MPN MS21250-08052Shear Bolt
- 5306-00-283-4591 MPN VAL23033-6H30Shear Bolt
- 5306-00-945-0556 MPN VA122033-816Shear Bolt
- 5306-01-045-6553 MPN VAL23608-3-29Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-250-6716 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-6-12A | Hi-shear Corporation |
HT4020-6-12A | Alcoa Global Fasteners, Inc. |
HT4020-6-12A | Lisi Aerospace Canada Corp |
HT4020-6-12A | Sps Technologies, Llc |
ST3M652C6-12A | Valley-todeco, Inc. |
HT4020-6-12A | Arconic Global Fasteners & Rings, |
ST3M652C6-12A | Heartland Precision Fasteners, Inc. |
HT4020-6-12A | Huck International, Inc. |
ST3M652C6-12A | Houston Precision Fasteners I, Lp |
HT4020-6-12A | Sps Technologies, Llc |
ST3M652C6-12A | Fastener Innovation Technology, Inc. |
HT4020-6-12A | Sps Technologies, Llc |
11925C6-12A | Reid Products Inc. |
WC4020-6-12A | West Coast Aerospace Inc |
ST3M652C6-12A | Alcoa Global Fasteners, Inc. |
HT4020-6-12A | Sps Technologies Ltd Tj Brooks |
HT4020-6-12A | Sps Technologies, Llc |
ST3M652C6-12A | Boeing Company, The |
HT4020-6-12A | Huck Intl Inc |
10113588 | Nimikkeistokeskus Ncb Finland |