NSN 5305-01-252-9167
High Torque Screw
Between 1.010 inches and 1.057 inches fastener length, flat countersunk head style, between 0.296 inches and 0.301 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B581-3-12H for national stock number 5305012529167.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-252-9167.
-
MPN or Model
51B581-3-12H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.010 inches and 1.057 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.301 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.893 inches first hole and 0.940 inches first hole -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-559-9240 MPN 14-27200-509Wing Landing Flap
- 1560-00-842-2498 MPN 2-23225-505Airfoil Rib
- 1560-00-938-9224 MPN 2-70461-501Canopy Jettison Handle Support
- 1560-01-035-9098 MPN 14-24010-504Right Hand Ning Edge Extension
- 4920-01-137-2850 MPN 14-76176-1Torque A Calibration Adapter Kit
- 1560-01-167-9484 MPN 3-55317-11Lower Half Plenum
- 1680-01-418-1613 MPN 14-73903-7Aircraft Controller Grip Assembly
- 1560-01-013-9740 MPN 18-10629-31Aircraft Access Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-252-9167 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |
51B581-3-12H | Northrop Grumman Technical Services, |
51B581-3-12H | Northrop Grumman Systems Corporation |