NSN 5305-01-253-7122
High Torque Screw
Between 1.376 inches and 1.406 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4048-6D16 for national stock number 5305012537122.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-253-7122.
-
MPN or Model
HT4048-6D16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.376 inches and 1.406 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.253 inches first hole and 1.293 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2964 MPN LS15264V04-10Machine Screw
- 5305-00-505-2993 MPN LS15264V3-10Machine Screw
- 5305-01-190-4591 MPN BACB30LH4-22Close Tolerance Screw
- 5305-01-338-7306 MPN HT4020-3-4AClose Tolerance Screw
- 5305-01-357-6326 MPN LE111-0033-0003Machine Screw
- 5305-01-386-2977 MPN SC5027-5-12Close Tolerance Screw
- 5305-01-393-4200 MPN HT4024L4-11MClose Tolerance Screw
- 5305-01-435-5755 MPN BACB30LU8-28Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-253-7122 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-6D16 | Huck International, Inc. |
HT4048-6D16 | Arconic Global Fasteners & Rings, |
ST3M713-6D16 | Boeing Company, The |
HT4048-6D16 | Sps Technologies, Llc |
HT4048-6D16 | Hi-shear Corporation |
HT4048-6D16 | Lisi Aerospace Canada Corp |
HT4048-6D16 | Huck Intl Inc |
HT4048-6D16 | Alcoa Global Fasteners, Inc. |
ST3M713-6D16 | Alcoa Global Fasteners, Inc. |