NSN 5305-01-253-7123
High Torque Screw
Between 1.438 inches and 1.468 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4048-6D17 for national stock number 5305012537123.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-253-7123.
-
MPN or Model
HT4048-6D17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.438 inches and 1.468 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.315 inches first hole and 1.355 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-8106 MPN ST3M466V8L9-1Close Tolerance Screw
- 5305-00-347-8291 MPN HT1029A4-8Close Tolerance Screw
- 5305-00-372-8344 MPN HT4024L3-4Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-045-4298 MPN HT4016-3-6YShoulder Screw
- 5305-01-061-7428 MPN HT8138-4-6TClose Tolerance Screw
- 5305-01-076-4932 MPN HT4020-5-9AXShoulder Screw
- 5305-01-101-5930 MPN R1432P008Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-253-7123 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-6D17 | Huck International, Inc. |
HT4048-6D17 | Arconic Global Fasteners & Rings, |
HT4048-6D17 | Hi-shear Corporation |
HT4048-6D17 | Lisi Aerospace Canada Corp |
ST3M713-6D17 | Alcoa Global Fasteners, Inc. |
HT4048-6D17 | Sps Technologies, Llc |
ST3M713-6D17 | Boeing Company, The |
HT4048-6D17 | Huck Intl Inc |
HT4048-6D17 | Alcoa Global Fasteners, Inc. |