NSN 5305-01-259-6992
Panel Screw
0.625 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number 03-15185B17 for national stock number 5305012596992.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-259-6992.
-
MPN or Model
03-15185B17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.625 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
First Diameter From Head
Between 0.140 inches and 0.150 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 -
Material Specification
Qq-s-763 cond a federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-189-6329 MPN 28A82737Electrical Plug Connector
- 5950-00-387-1881 MPN 24B35222Radio Frequency Coil
- 5905-00-577-9483 MPN 6S124A65Composition Fixed Resistor
- 5935-01-167-1602 MPN 28-P09776G037Electrical Receptacle Connector
- 5935-00-137-2212 MPN 28-26276L01Electrical Plug Connector
- 5950-01-411-5768 MPN 2405262E14Radio Frequency Coil
- 5930-01-411-6166 MPN 4005061E01Toggle Switch
- 5985-01-020-7877 MPN 58-26257B01Waveguide Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-259-6992 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03-15185B17 | Motorola Inc. |
03-15185B17 | General Dynamics Mission Systems, |