NSN 5305-01-261-0669
Bolt Stove
Between 1.063 inches and 1.187 inches fastener length, flat countersunk undercut head style, 0.332 inches head diameter, head height: between 0.084 inches and 0.100 inches .
Manufacturer part number AN510-8R18 for national stock number 5305012610669.
Datasheet
-
Product description
Machine Screw NSN 5305-01-261-0669.
-
MPN or Model
AN510-8R18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.963 inches and 1.087 inches -
Fastener Length
Between 1.063 inches and 1.187 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.332 inches -
Head Height
Between 0.084 inches and 0.100 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 440b -
Screw Material Specification
Astm a 106, type fs1010 federal standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, class 3, type 11 federal standard single treatment response -
Thread Series Designator
Unf -
Specification Data
88044-an510-8r18 government specification
More from these suppliers
- 5935-00-236-0972 MPN AN3102A20-29SElectrical Receptacle Connector
- 4820-00-287-4120 MPN AN771P1Drain Cock
- 5930-01-231-2517 MPN AN3227-1Toggle Switch
- 5305-00-071-1317 MPN AN515C416-14Machine Screw
- 5305-00-151-1363 MPN AN515-5R10Machine Screw
- 5305-00-151-2490 MPN AN510-8-5Machine Screw
- 5305-00-151-3734 MPN AN520-1-2Machine Screw
- 5305-00-167-2348 MPN AN531-4-4Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-261-0669 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN510-8R18 | Aeronautical Standards Group |