NSN 5305-01-261-1900
High Torque Screw
0.0156 in. Oversize shank for repair work only.
Manufacturer part number 51B334-13X for national stock number 5305012611900.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-261-1900.
-
MPN or Model
51B334-13X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.326 inches -
Fastener Length
Between 1.119 inches and 1.139 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.499 inches and 0.507 inches -
Grip Diameter
Between 0.264 inches and 0.265 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.803 inches and 0.823 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Chromium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-245-8796 MPN AIC1023H4-24Close Tolerance Screw
- 5305-00-340-4778 MPN NAS1101E3H10Machine Screw
- 5305-00-538-7413 MPN BACB30LU6-21Close Tolerance Screw
- 5305-00-948-0766 MPN 51B335-9Machine Screw
- 5305-01-359-5616 MPN 68A323237-2011Machine Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-528-7154 MPN BACS12HN3K8Hexagon Head Cap Screw
- 5305-01-627-5905 MPN JSFB38-10-38DMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-261-1900 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B334-13X | Northrop Grumman Technical Services, |
51B334-13X | Sps Technologies, Llc |
51B334-13X | Arconic Global Fasteners & Rings, |
51B334-13X | Sps Technologies, Llc |
51B334-13X | Hi-shear Corporation |
51B334-13X | Sps Technologies, Llc |
51B334-13X | Alcoa Global Fasteners, Inc. |
51B334-13X | Lisi Aerospace Canada Corp |
51B334-13X | Northrop Grumman Systems Corporation |