NSN 5305-01-261-4795
High Torque Screw
Between 2.819 inches and 3.119 inches fastener length, flat countersunk head style, between 0.688 inches and 0.755 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number 3M926-8-35 for national stock number 5305012614795.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-261-4795.
-
MPN or Model
3M926-8-35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.731 inches and 0.831 inches -
Fastener Length
Between 2.819 inches and 3.119 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.688 inches and 0.755 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, type 2, cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-481-0078 MPN 11827D4-35AClose Tolerance Screw
- 5305-01-485-5732 MPN 11827D3-5AClose Tolerance Screw
- 5306-01-141-7876 MPN 11921-4D26Shoulder Bolt
- 5306-01-332-3179 MPN 11797A05U013Close Tolerance Bolt
- 5306-01-386-3535 MPN 11825-8-12Close Tolerance Bolt
- 5306-01-600-4194 MPN 11857E5D17AShear Bolt
- 5320-00-442-0040 MPN TLHC200-4-15Pin-rivet
- 5320-01-142-3587 MPN TLD110-6-10EPin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-261-4795 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M926-8-35 | Boeing Company, The |
11883-8-35 | Reid Products Inc. |