NSN 5305-01-262-6738
High Torque Screw
Between 0.4955 inches and 0.5255 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number H044-3-3R for national stock number 5305012626738.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-262-6738.
-
MPN or Model
H044-3-3R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.4955 inches and 0.5255 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.1775 inches and 0.1975 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-372-9982 MPN HT4024L3-11Close Tolerance Screw
- 5305-00-395-3361 MPN NAS1101E08-5Machine Screw
- 5305-01-158-5368 MPN AIC944-06-6Machine Screw
- 5305-01-158-5371 MPN AIC940-3-9Machine Screw
- 5305-01-240-1278 MPN AIC984-3-11Close Tolerance Screw
- 5305-01-319-2122 MPN AIC1652-4-10Close Tolerance Screw
- 5305-01-325-5992 MPN AIC939-3-9PClose Tolerance Screw
- 5305-01-475-3195 MPN TX1027V3-3AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-262-6738 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H044-3-3R | Huck International, Inc. |
VT1693F33-R | Alcoa Global Fasteners, Inc. |
AIC984-3-3R | Sps Technologies, Llc |
C7984-3-3R | Sps Technologies, Llc |
C7984-3-3R | Sps Technologies, Llc |
C7984-3-3R | Sps Technologies, Llc |
C7984-3-3R | Lockheed Martin Corporation |
H044-3-3R | Huck Intl Inc |
AIC984-3-3PR | Sps Technologies, Llc |