NSN 5305-01-263-3817
High Torque Screw
Between 1.036 inches and 1.066 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number VT1694AS3-11 for national stock number 5305012633817.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-263-3817.
-
MPN or Model
VT1694AS3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.036 inches and 1.066 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, type 2, class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5402 MPN AIC811-00-3Socket Head Cap Screw
- 5305-00-486-2581 MPN AIC1023H10-15Close Tolerance Screw
- 5305-00-931-7251 MPN A1C82-3-3Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-054-6268 MPN AIC985-4-4PClose Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6PClose Tolerance Screw
- 5305-01-348-8660 MPN AIC4414-06-6Machine Screw
- 5305-01-417-6446 MPN AIC1198-08-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-263-3817 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1694AS3-11 | Arconic Global Fasteners & Rings, |
121558-3-A11B | Sps Technologies, Llc |
VT1694AS3-11 | Alcoa Global Fasteners, Inc. |
AIC985B3-11 | Sps Technologies, Llc |
C7985B3-11 | Lockheed Martin Corporation |
H185B3-11 | Huck International, Inc. |
C7985B3-11 | Sps Technologies, Llc |
PBF1166B3-11 | Sps Technologies, Llc |
121558-A11B | Sps Technologies, Llc |
H185B3-11 | Huck Intl Inc |
C7985B3-11 | Alcoa Global Fasteners, Inc. |