NSN 5305-01-263-6160
High Torque Screw
Between 0.660 inches and 0.690 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number AIC985B3-5 for national stock number 5305012636160.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-263-6160.
-
MPN or Model
AIC985B3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2, class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-575-2564 MPN 3M943E5-4-4Headle Shoulder Pin
- 5305-00-252-8991 MPN A1C812-04-5Machine Screw
- 5305-00-942-5362 MPN 490333Machine Screw
- 5305-00-975-1760 MPN AIC792-4-9Machine Screw
- 5305-01-028-2470 MPN HT4020-4-6AClose Tolerance Screw
- 5305-01-054-6275 MPN AIC985-5-17PClose Tolerance Screw
- 5305-01-131-2934 MPN ST3M733-5L11Close Tolerance Screw
- 5305-01-207-7518 MPN BACS12CK3-37Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-263-6160 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985B3-5 | Sps Technologies, Llc |
C7985B3-5 | Lockheed Martin Corporation |
C7985B3-5 | Arconic Global Fasteners & Rings, |
H185B3-5 | Huck International, Inc. |
C7985B3-5 | Sps Technologies, Llc |
C7985B3-5 | Alcoa Global Fasteners, Inc. |
PBF1166B3-5 | Sps Technologies, Llc |
121558-3-A5B | Sps Technologies, Llc |
H185B3-5 | Huck Intl Inc |