NSN 5305-01-264-1473
High Torque Screw
Between 1.313 inches and 1.343 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number LD111-0044-0613 for national stock number 5305012641473.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-264-1473.
-
MPN or Model
LD111-0044-0613
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.308 inches and 0.541 inches -
Fastener Length
Between 1.313 inches and 1.343 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-1581 MPN AIC617-21Externally Relieved Body Screw
- 5305-01-059-4881 MPN AIC984-5-16Close Tolerance Screw
- 5305-01-207-7519 MPN BACS12CK3-44Machine Screw
- 5305-01-261-1900 MPN 51B334-13XClose Tolerance Screw
- 5305-01-358-7309 MPN AIC4040-3-07RClose Tolerance Screw
- 5305-01-428-2140 MPN C7984-3-11RShoulder Screw
- 5305-01-521-6777 MPN TX1027C3-24AClose Tolerance Screw
- 5305-01-627-3199 MPN JSFB34V3-20Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-264-1473 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0613 | Boeing Company, The |
LD111-0044-0613 | Sps Technologies, Llc |
LD111-0044-0613 | Hi-shear Corporation |
LD111-0044-0613 | Lisi Aerospace Canada Corp |
LD111-0044-0613 | Sps Technologies, Llc |
LD111-0044-0613 | Arconic Global Fasteners & Rings, |
LD111-0044-0613 | Huck International, Inc. |
LD111-0044-0613 | Sps Technologies, Llc |
LD111-0044-0613 | Sonic Industries Inc. |
LD111-0044-0613 | Pro Corporation-pmc |
LD111-0044-0613 | Molex Incorporated |
LD111-0044-0613 | Molex Incorporated |