NSN 5305-01-264-1474
High Torque Screw
Between 1.396 inches and 1.426 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number LD111-0044-0713 for national stock number 5305012641474.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-264-1474.
-
MPN or Model
LD111-0044-0713
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.574 inches and 0.624 inches -
Fastener Length
Between 1.396 inches and 1.426 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-137-8207 MPN B3110-01Screw
- 5305-00-159-2617 MPN AIC1023V5-21Close Tolerance Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-082-9291 MPN AIC1184-304Close Tolerance Screw
- 5305-01-200-1433 MPN BACB30VF4K14Close Tolerance Screw
- 5305-01-381-1408 MPN 1701-4-12Close Tolerance Screw
- 5305-01-435-3883 MPN BACB30LU7-41Close Tolerance Screw
- 5305-01-439-4807 MPN TX1027D3-3AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-264-1474 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0713 | Boeing Company, The |
LD111-0044-0713 | Sps Technologies, Llc |
LD111-0044-0713 | Arconic Global Fasteners & Rings, |
LD111-0044-0713 | Sps Technologies, Llc |
LD111-0044-0713 | Sonic Industries Inc. |
LD111-0044-0713 | Hi-shear Corporation |
LD111-0044-0713 | Sps Technologies, Llc |
LD111-0044-0713 | Lisi Aerospace Canada Corp |